How to Check Oil Level Jeep Grand Cherokee? Step-By-Step Guide

Any car doesn’t perform well without fresh, clean motor oil. It’s because motor oil’s only job is to lubricate your engine moving parts and protect them from friction. Checking and changing your car oil level is crucial to ensure your engine’s longevity.

But every car oil checking system is different. For example, every car owner must learn to check Jeep Grand Cherokee’s oil level. However, if you know it, you can understand the right amount. So, from this article, you can see the procedure for checking the oil. Please, read attentively.

how to check oil level jeep grand cherokee

Why Is It Important To Check Your Oil Level?

Car owners don’t get pressured about oil changes because they are rapid service which is not typically complicated. That doesn’t mean they aren’t necessary. In general, it’s recommended to change the oil twice a year. But it may vary based on car model/make, driving habits, and location.

Nevertheless, if you can maintain the oil change routine, it can give you the confidence to begin your daily errands. Also, without any tension about oil, it gives you a weekend adventure.

How to Check Oil Level Jeep Grand Cherokee?

Note that most new cars come with electronic oil level monitors. This means you can’t find a traditional oil dipstick under the hood. You can monitor your oil level by checking your service manual. Follow these steps to learn how to check Jeep Grand Cherokee’s oil level.

Step 1. 

First, park your Jeep Grand Cherokee on flat ground and keep your engine off.

Step 2. 

Raise the safety catch on your car, pop the hood, and raise your hood. Locate the dipstick. Again, if you need help understanding where it is, then check the owner’s manual and find out where exactly it is.

Step 3. 

Now locate your oil dipstick and then remove the dipstick. After removing the dipstick, wipe it off with a clean towel and tissue paper.

Step 4. 

Put the dipstick back into the tube, then pull it out. To check the oil line, look at your dipstick.

Usually, if the oil line is between the two marks or within the cross-hatched area, the oil level is acceptable. If it doesn’t, it’s time to top it up.

Step 5. 

If you add new oil, buy the oil recommended in your owner’s manual. Therefore, remove the cap of the oil filler and add the oil continuously until the oil level is in the right place.

Read also: What to do, if no oil on dipstick

Jeep Cherokee Transmission Fluid Check: 

Your vehicle must be level when checking the fluid. And it’s best to check your transmission fluid with a mechanic. A mechanic can treat any fluid leaks on your transmission.

Jeep Cherokee doesn’t have a transmission fluid dipstick. The manufacturer made this car transmission maintenance-free. To check your car transmission fluid, it probably has a check valve under your transmission.

During checking the fluid, your car must be level. That’s why we recommend checking your transmission fluid in a hydraulic lift. You must treat fluid leaks with the mechanic for this type of transmission.

how to check oil level jeep grand cherokee

Jeep Grand Cherokee Oil Dipstick Location:

The Jeep Grand Cherokee oil dipstick is located at your engine back. In other words, under your hood, you can see your oil reserve and the dipstick that goes with it under the engine sump. The 2015 Jeep Grand Cherokee is one of the best cars and has a dipstick.

So, the 2015 Jeep Grand Cherokee oil dipstick location is on the left side of your car engine. From 2011-2019 Jeep Grand Cherokee oil dipstick location is the same. That means the 2014 Jeep Grand Cherokee oil dipstick location is the same place. So, from 2011 to 2019, Jeep Grand car owners could find their dipstick easily.

FAQ( Frequently Asked Questions): 

Q. How much oil does a 2015 Jeep Grand Cherokee take?

How much oil you need to use depends on your car type, oil type, and engine size. For example, a 4-cylinder engine consumes less oil and usually uses traditional crude compared to a high-performance V-8 engined car. It’s because the high-performance vehicle may need fully-synthetic motor oil.

Most engines need 5 to 8 quarts of oil. For instance, a 4-cylinder engine will need at least 5 quarts of oil. And a 6-cylinder engine will need about 6 quarts of engine oil.

Today ask for a Courtesy Chrysler Jeep Dodge Ram for a loan from our service advisors for more information.

Q. How to check the oil in the jeep patriot?

Whether your car uses conventional or synthetic oil, checking the oil level is easy. Follow some of these essential steps to learn how to check the oil in a jeep patriot.

Step 1. 

Pop your car hood, and find the car’s oil dipstick. This will usually be in a tube near your car engine.

Step 2. 

Pull out your car engine dipstick and wipe it to remove the oil. Typically, it clears the path for an accurate oil level reading.

Step 3. 

Reinsert the dipstick fully and pull again.

Step 4. 

Your dipstick will have an oil level indicator. Check your oil level to ensure you’re good to go, or add more oil if needed.

Step 5. 

When removing the dipstick, rub the oil between your fingers to detect any stains or debris. Hence, it will inform you whether an oil change is needed. Most importantly, it will guarantee that your car will run smoothly.

Q. How to check the oil on Jeep Cherokee?

Every car does not have a dipstick, but you know that the Jeep Cherokee comes with a dipstick. But the different model of Jeep Cherokee contains different dipsticks. Nonetheless, to know what type of dipstick your Jeep Cherokee has, check your owner’s manual.

After knowing about your dipstick, you can quickly check your car oil. Checking your car oil procedure is the same as a traditional car. That’s why we won’t discuss it again. See the above checking instructions and check your Jeep Cherokee oil quickly.

Q. How to check the oil level, jeep wrangler?

Here are the steps of how to check oil level help wrangler. Follow these steps:

Step 1. 

Make sure your Jeep engine is off. And you should ensure you allow the oil to cool down and return to the reserve. Otherwise, your test will fail (at least 30 minutes).

Step 2.

Then you should find your Jeep Wrangler oil tank, which can be bright or yellow.

Step 3.

Open it, then grab the dipstick that looks like a metal rod. Clean oil deposits with a rag. Therefore, it can help you quickly see your reserves’ level.

Step 4. 

After once cleaned, you will quickly see the two rods’ level. One is the maximum oil amount, and the other is the minimum.

Step 5. 

So now slide the metal rod down into your oil tank. Gently pull it off and check the brand of oil that highlights your layer.

Final Word

On the other hand, now you know how to check Jeep Grand Cherokee’s oil level. This procedure can also scan another Jeep oil and oil level system. After reading our article, we hope you can quickly check your Jeep Cherokee, Jeep Patriot, and Jeep Wrangler oil level.

The reason is that we have given some easy steps to check their oil level here. But if you know more information about your Jeep Grand Cherokee, please get in touch with us. Happy journey!


I am Engr. Z Eusuf Lubricant Specialist, Mechanical Engineer & has been working with engine lubricants for a long time and knows what makes them work best. I can help you find the right oil for your needs, and I have tips on how to keep your engine running at its best.